Date Published: December 11, 2009
Comments Due:
Email Questions to:
Planning Note (8/30/2012):
A Federal Register Notice was posted, requesting additional comments on specific sections and subsections of the 2009 draft.
Author(s)
National Institute of Standards and Technology
Announcement
The Revised Draft FIPS 140-3 is the second public draft of NIST's proposed revision of FIPS 140-2. The Revised Draft was developed using the comments received on the first public draft, which was posted for public review and comment on July 13, 2007, and the FIPS 140-3 Software Security Workshop held on March 18, 2008. While the 2007 Draft proposed 5 levels of security, the Revised Draft FIPS 140-3 reverts to 4 levels of security as currently specified in FIPS 140-2. In contrast to the 2007 Draft, the Revised Draft also reintroduces the notion of firmware cryptographic module and defines the security requirements for it, limits the overall security level for software cryptographic modules to Security Level 2, and removes the formal model requirement at Security Level 4. Differences with the current FIPS 140-2 standard include limiting the overall security level for software cryptographic modules to Security Level 2, requirements for mitigation of non-invasive attacks at higher security levels, elimination of the requirement for formal modeling at Security Level 4, modified conditions for pre-operational/power-on self-tests, and strengthened integrity testing.
The selective application of technological and related procedural safeguards is an important responsibility of every Federal organization in providing adequate security in its computer and telecommunication systems. This standard is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106 and the Federal Information Security Management Act of 2002, Public Law 107-347. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. The standard provides four increasing, qualitative levels of security intended to cover a wide range of potential applications and environments. The security requirements cover areas related to the secure design, implementation, operation and disposal of a cryptographic module. These areas include cryptographic module specification; cryptographic module physical ports and logical interfaces; roles, authentication, and services; software security; operational environment; physical security; physical security – non-invasive attacks; sensitive security parameter management; self-tests; life-cycle assurance; and mitigation of other attacks.
The selective application of technological and related procedural safeguards is an important responsibility of every Federal organization in providing adequate security in its computer and telecommunication systems. This standard is applicable to all Federal agencies that use cryptographic-based...
See full abstract
The selective application of technological and related procedural safeguards is an important responsibility of every Federal organization in providing adequate security in its computer and telecommunication systems. This standard is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106 and the Federal Information Security Management Act of 2002, Public Law 107-347. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. The standard provides four increasing, qualitative levels of security intended to cover a wide range of potential applications and environments. The security requirements cover areas related to the secure design, implementation, operation and disposal of a cryptographic module. These areas include cryptographic module specification; cryptographic module physical ports and logical interfaces; roles, authentication, and services; software security; operational environment; physical security; physical security – non-invasive attacks; sensitive security parameter management; self-tests; life-cycle assurance; and mitigation of other attacks.
Hide full abstract
Keywords
computer security; telecommunication security; physical security; software security; cryptography; cryptographic modules; Federal Information Processing Standard (FIPS).
Control Families
Identification and Authentication; System and Communications Protection; System and Information Integrity
) or https:// don't prove our archive is authentic, only that you securely accessed it. Note that we are working to fix that :)
